
SONOFF ZBMINI Extreme Zigbee Smart Switch ZBMINIR2
ZBMINIR2 is an extremely compact Zigbee 3.0 single-channel neutral wire switch, capable of being installed in a mounting box and supporting a maximum load of 10A, thus making ordinary switches smart. It supports a repeater function to easily improve Zigbee communication quality and can also link with other devices in smart scenarios to realize your home automation.
- Size Optimization: Reduced by 40% compared to the ZBMINI.
- Chip Upgrade: Features the EFR32MG21 chip, significantly enhancing communication capabilities.
- Repeater Functionality: Supports extend up to 64 Zigbee end devices, offering extensive expansion options.
- Smart Light Compatibility: Equipped with the 'Detach Relay Mode', enabling closing the external switch while keeping the smart lights online.
- Smart Lighting Control
Upgrade traditional wall switches for lights or ceiling lamps into smart switches with Zigbee connectivity. Control lighting remotely via app, voice assistant, or automation scenes.
- Home Appliance Automation
Easily convert on/off control of small home appliances (e.g., fans, coffee makers) into smart, scheduled, or remotely managed devices.
- Zigbee Network Expansion
With built-in repeater functionality, ZBMINIR2 extends the Zigbee network range, making it ideal for large homes or areas with a weak Zigbee signal.
Model
ZBMINIR2
MCU
EFR32MG21
Rating
100-240V~ 50/60Hz 10A Max Resistive Load μ
Max. Load
2400W@240V
Wireless Connectivity
Zigbee 3.0
Net Weight
26.7g
Dimension
39.5x33x16.8mm
Color
White
Casing Material
PC V0
Applicable Place
Indoor
Working Temperature
-10℃~40℃
Working Humidity
5%~95% RH, non-condensing
Working height
Less than 2000m
Certification
CE/FCC/ISED/RoHS
Executive standard
EN 60669-2-1
1. Does ZBMINIR2 require a neutral wire?
Yes. ZBMINIR2 requires a neutral wire for installation. Please make sure your switch box has both live and neutral wires available.
2. Does ZBMINIR2 require a Zigbee gateway?
Yes. ZBMINIR2 requires a Zigbee gateway for realizing smart control.
3. What's the maximum load ZBMINIR2 can support?
ZBMINIR2 supports a maximum load of 10A, suitable for most household lighting and small appliances. Always ensure the connected device is within the rated capacity.
4. Can ZBMINIR2 work with voice assistants?
Yes. When the ZBMINIR2 was added to the compatible SONOFF hub, and after binding a third-party account in the eWeLink app, voice control through a smart speaker will be enabled.
5. Can I use ZBMINIR2 with my existing wall switch?
Absolutely! ZBMINIR2 is designed to retrofit behind your existing wall switch, allowing manual and smart control at the same time.
6. What is the repeater function?
ZBMINIR2 functions as a Zigbee signal repeater, extending the range and improving the stability of your Zigbee network when powered on and connected.
1. Device not pairing with Zigbee hub
Ensure the device is powered on and wired correctly.
Long-press the pairing button until the LED indicator starts blinking rapidly.
Ensure your hub is compatible and in pairing mode and within 2 meters of the device during initial pairing.
Try restarting your hub and retry the pairing process.
2. ZBMINIR2 shows offline or unresponsive
Check the power supply and ensure the device is powered.
Make sure your Zigbee hub is online and within signal range.
Try rebooting the hub or power-cycling the ZBMINIR2.
If the issue persists, repair the device.
3. Switch not controlling the load
Ensure Live In, Live Out, and Neutral are properly connected.
Make sure the connected device does not exceed the 10A rating.
If using a wall switch, ensure it's functioning properly and wired correctly.
4. The Zigbee signal is still weak in some areas.
Try relocating ZBMINIR2 to a central or elevated position.
Avoid placement near metal surfaces or dense walls.
Add more Zigbee routers to create a mesh network.















