
SONOFF Smart Roller Shutter Switch | MINI-RBS
This Smart Roller Shutter Switch is small in size, perfectly compatible with the European version of the recessed box, and supports a motor with a maximum current of 1A as a load. It supports WiFi remote control and Matter platform compatibility and integrates seamlessly with various smart home systems. Connect the device to the switch and motor correctly to upgrade regular electric roller blinds to a smart system.
- Mini Size: This product is compact and perfectly compatible with various small-sized wall-mounted junction boxes, including the European standard 80 junction box.
- Matter Compatibility: This curtain retrofit device ensures compatibility with multiple platforms and their devices, breaking down the ecological barriers with third-party platforms.
- Precise Percentage Adjustment: Control indoor lighting according to your needs, enhancing comfort and energy efficiency while adapting flexibly to different scenarios.
- Scheduled Curtain Operation: Set specific times for curtain opening and closing based on your routines, enhancing convenience in daily life.
- Calibration of Curtain Operation Errors: Reduce hardware inaccuracies and extend the lifespan of your smart curtains.
- Security Mode:
While you're away, remotely check and control the roller blind status, simulating the presence of someone at home. It can also integrate with motion sensors to automatically close the blinds when motion is detected, enhancing security. - Comfort Mode:
Integrate with compatible Matter-based light sensors to automatically close the blinds when strong sunlight is detected, helping to cool the room during summer. Additionally, it can work with temperature and humidity sensors, and when a drop in temperature is detected, the blinds can be fully opened to naturally warm the room using sunlight. - Wake-Up Mode:
Automatically open the blinds to 30% in the morning, allowing natural sunlight to gently wake you up without being too harsh on your eyes.
- Security Mode:
Model
MINI-RBS
MCU
ESP32
Rating
100-240V~ 50/60Hz 1A Max
Wireless connectivity
Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Net weight
25.1g
Product dimension
39.5x33x16.8mm
Color
White+Purple
Casing material
PC
Applicable place
Indoor
Working temperature
10T40 (-10℃~40℃)
Working humidity
5-95%RH, non-condensing
Working height
Less than 2000m
Certification
CE/FCC/RoHS
FCC ID
2APN5-MINIRBS
Pollution degree
2
Rated impulse voltage
4kV
Automatic action
10000 Cycles
Control type
Type 1.B
Diameter of wiring(recommend):
18AWG to 14AWG SOL/STR copper conductor only
- Can the motor run continuously in the same direction?
No. The motor should not operate in a single direction for more than 2 minutes. To prevent overheating and damage, the device will automatically enter a stop state after exceeding this time limit. - Can the device be used without connecting a "Switch"?
Yes. Whether S1/S2 are connected to an external switch or not, it does not affect automation or app control functionality.
- Can the motor run continuously in the same direction?
- The switch control behaves differently than expected. Why?
The issue may arise if the connected switch type does not match the device's current "Switch Mode."
Solution:
- Quickly press the button on the MINI-RBS three times until the blue LED flashes rapidly three times.
- Repeat this up to two times if needed to find the correct "Switch Mode."
- Why does the app show the device as offline after clicking "Enable Pairing Mode"?
After enabling Pairing Mode in the eWeLink app, the device enters Network Pairing Mode (indicated by a
"two short, one long" LED pattern) and shows as "Offline." Short-press the device button to restore
"Online" status.
- Why is the percentage control accuracy of my device not accurate?
Note! If your device exhibits "inaccurate percentage control precision," we recommend pairing it with the eWeLink App and updating its firmware to the latest version (V1.0.3).
- The switch control behaves differently than expected. Why?















