
SONOFF Zigbee Smart Roller Shutter Switch | MINI-ZBRBS
MINI-ZBRBS is a compact Zigbee smart curtain switch module designed to fit standard wall boxes, allowing you to easily upgrade a traditional motorized roller shutter into a smart curtain system. It supports motors with up to 1A load, and works with a Zigbee hub to enable app-based remote control, scheduled operation, and smart scene automation. Additionally, it functions as a Zigbee signal repeater, helping to strengthen and stabilize your Zigbee network coverage.
- Mini Size:
This product is compact and perfectly compatible with various small-sized wall-mounted junction boxes, including the European standard 60/80 junction box.
- Precise Percentage Adjustment:
Control indoor lighting according to your needs, enhancing comfort and energy efficiency while adapting flexibly to different scenarios.
- Scheduled Curtain Operation:
Set specific times for curtain opening and closing based on your routines, enhancing convenience in daily life.
- Calibration of Curtain Operation:
Reduce hardware inaccuracies and extend the lifespan of your smart curtains.
- Seamless Integration with Major Smart Home Platforms:
Effortlessly join Home Assistant (via ZHA & Zigbee2MQTT) for an automation setup.
- Zigbee Signal Booster:
MINI-ZBRBS acts as a Zigbee router device, which helps extend your Zigbee network. Enjoy a stronger signal and improved reliability across your entire smart home.
- Security Mode:
While you're away, remotely check and control the roller blind status, simulating the presence of someone at home. It can also integrate with motion sensors to automatically close the blinds when motion is detected, enhancing security. - Comfort Mode:
It can work with temperature and humidity sensors, and when a drop in temperature is detected, the blinds can be fully opened to naturally warm the room using sunlight. - Wake-Up Mode:
Automatically open the blinds to 30% in the morning, allowing natural sunlight to gently wake you up without being too harsh on your eyes.
- Security Mode:
Product name
MINI-ZBRBS
Product series
MINI Extreme Series
Product type
Smart Roller Shutter Switch
Model
MINI-ZBRBS
MCU
EFR32MG21
Rating
100-240V~ 50/60Hz 1A Max
Wireless connectivity
Zigbee 3.0
Net weight
25.1g
Product dimension
39.5x33x16.8mm
Color
White
Casing material
PC
Applicable place
Indoor
Working temperature
10T40 (-10℃~40℃)
Working humidity
5-95%RH, non-condensing
Max. Altitude
2000m
Diameter of wiring(recommend):
18AWG to 14AWG SOL/STR copper conductor only
Certification
CE/FCC/RoHS
FCC ID
2APN5-MINIZBRBS
Pollution degree
II
Rated impulse voltage
4kV
Automatic action
10000 Cycles
Control type
Type 1.B
1. What types of curtain motors are supported by MINI-ZBRBS?
The motors supported by the device for control are general 4-wire AC motors and 5-wire AC motors (with zero wire, motor forward line, motor reverse line, and ground line), as long as the load does not exceed 1A.
2. Can I schedule the curtain to open or close at specific times?
Yes. You can create timer schedules through the eWeLink app for automatic curtain operation.
3. Do I need to modify my existing wall switch for installation?
No major modifications are needed. The compact design fits into standard wall boxes and can work with your existing mechanical switch.
4. Does the device function as a Zigbee repeater?
Yes, MINI-ZBRBS has built-in Zigbee signal repeater functionality to help improve and stabilize your Zigbee network coverage.
5. Can the motor run continuously in the same direction?
No. The motor should not operate in a single direction for more than 2 minutes. To prevent overheating and damage, the device will automatically enter a stop state after exceeding this time limit.
6. Can the device be used without connecting a "Switch"?
Yes. Whether S1/S2 are connected to an external switch or not, it does not affect automation or app control functionality.
1. Unable to add the device to the Zigbee hub
Check if the device is powered and the indicator light is responsive.
Press and hold the reset button for ≥5 seconds to enter pairing mode.
Ensure the Zigbee hub is within range and in pairing mode.
Try restarting the hub and reattempting the pairing process.
2. The curtain cannot be controlled via the app
Check the motor wiring and ensure the connected load does not exceed 1A.
Make sure the Zigbee network is stable, or try re-pairing the device.
3. The curtain opens/closes in the wrong direction
Use the app’s Motor Rotation Direction to correct movement.
Alternatively, swap the motor's "up" and "down" wire terminals.
4. The device frequently goes offline or responds slowly
Check for Zigbee interference or signal obstacles.
Avoid installing the device inside metal wall boxes.
Add more Zigbee routers/repeaters to strengthen network coverage.
5. The curtain does not fully open or close
Calibrate the upper and lower curtain limits through automatic calibration or manual calibration.
6. The switch control behaves differently than expected
Quickly press the button on the MINI-ZBRBS three times until the blue LED flashes rapidly three times.
*Repeat this up to two times if needed to find the correct "Switch Mode."















