HY367 Zigbee Radiator Actuator | TRV

HY367 Tuya Smart Zigbee Radiator Actuator | TRV

Smart TRV thermostat can connect with other Zigbee devices through Wi-Fi Router;
The thermostat can be widely applied for housing,shopping mall,hotel heating and central air conditioning temperature control;
Connectors equipped with our thermostat can control temperature via App, with holiday model and special arrangement for day off;
Users can set working time for device in Smart Life App, with mini design, simple operation, convenient display and little oppucation of space;
Our connectors can be programmed weekly with 5 plus 2, 6 plus 1 and 7days programmable;
Our heating temperature controller are elegant and simple in appearance, and can be easily operated by tapping buttons.

Note: TRV means 'thermostatic radiator valves'

Buy in our Alibaba store:

https://alibaba.link.ifreeq.com/hy367

Power Supply: 2 x AA batteries (without batteries in the box)
Max. Current: 90mA
Probe Sensor: NTC(10k) 1%

Display Accuracy: 0.5℃
Range of Temperature Adjustment: 5℃ - 35℃
Working Environment Temperature: -10℃ - 60℃
Display Temperature Range: 1 - 70℃

Size (mm): 90 * Φ55mm
Thread size: M30 x 1.5mm
Max. Route: 4.5mm

Insulating Condition: Normal Environment
Running Program: Set per 1 week as a cycle
1 x HY367 TRV Thermostat

1 x User Manual

1 x Adapter Pack(1*RA adapter; 1*RAV adapter; 1*RAVL adapter)
To prevent the thermostat display from a high fluctuation, special treatment has been made to the program. Therefore, it is normal that the thermostat cannot immediately display the sudden change of temperature;

The thermostat installed on 1.5m above the ground;

For the thermostat installed,please take care not to install it to the wall corner, door / window side or behind the door or in such unheated area as exterior wall. Avoid hot / cold air duct, radiator, flue or thermal pipe;

When install the power supply, make sure that the power cable is well insulated;

Do not open the internal circuit board;

HY08AC series thermostat design for the standard 75x75x 35mm wall mount box installed. Follow the instructions to open the rear cover base, mount it on the wall and wire it;

Before installing the thermostat, make sure that the system is disconnected. The maximum voltage of the system shall meet the requirements specified in the Instruction Manual (Max. AC Voltage: 250V).